Measuring on the map

To measure on the map, tap the Measurements button. The button will change its color and the tool window will appear.

If you want to measure distance, tap Measure distance icon.

If you want to measure area, tap Measure area icon, accordingly.

If you want to measure geographic azimuth, tap Measure azimuth icon.

If you want to measure radius of a circle, tap Measure radius icon.

Measuring distance and area

To start measurement, sequentially tap the map adding points.

To delete the needless point, tap it again.

The calculated distance or area will be shown in the upper part of the measurement window.

Measuring the geographic azimuth

To start measurement, sequentially add two points on the map.

The calculated value will be shown in the measurement window.

Measuring the radius of a circle

To start measurement, add a point on the map and enter the radius value in the measurement window.

To change radius calculation units, press the Switch button.

Measuring on the map is also possible using My location option. To start measurement from the point of your current location, select the tool and then tap button. Now the point of your current location will be used as the starting or one of the intermediate points of measurement.

To change measurement units for distance, areas or circle radius, go to Application settings of the map menu (note that changing units is possible if you are not in the measurement mode). In the Measure units section select the required units:

• Metric system (meters, kilometers):
  • Area units:
  • Square meters/kilometers,
  • Hectares;
• British system (feet, miles, acres).

To close the measurement window, tap the cross icon in the upper right corner of the window or tap Measurements button again.

To copy the measurement result, long tap the value and tap Copy in the appeared dialog.